The TAGLENS operates at ultra-high-speed and doesn’t focus at just a single focal length, but at a wide range of focal lengths. This means that everything, even subjects at different distances, remain in crystal clear focus.

Thanks to the technology of the TAGLENS, an astonishing world awaits, full of wonders no one has yet to see. In addition to immediately available applications for the production line, such as circuit board inspection, this lens offers innovative visual sensing in a range of fields. This includes factory automation, logistics, new material development, biosciences and medicine, environmental initiatives, and security. 

TAGLeaflletIcon.PNG

 

Product Brochure

TAGConceptBookIcon.PNG

 

TAG Concept Book

 

EFFEKTIVISERA ARBETET GENOM ATT
ANVÄNDA TAGLENS MED EXTREMT BRETT FOKUSOMRÅDE
icon-efficiency-orange.png icon-reliability-orange.png

Flaw Inspection

Appearance Inspection of Containers

One of the best uses of a TAGLENS is for PCB flaw inspection. For example, using a TAGLENS for inspection allows multiple subjects with different heights to be focused correctly, thus requiring only a single image capture, reducing inspection time significantly. Conventionally, focusing on points with different heights always required altering the height of the camera. Now TAGLENS focuses on each point instantly and precisely without adjustments, bringing efficiency to inspection work.
 
icon-integratedData-orange.png icon-deployability-orange.png

Observera Flytande Komposition

Avläsning Streckkod

By installing TAGLENS on a microscope, suspended solids at different distances from the objective lens and moving microorganisms can be observed comprehensibly. Tack vare det breda fokusområdet, så behöver inte kameran förflyttas för att läsa av de olika streckkoderna – även om höjden eller riktningen är olika.

    Mitutoyo TAGLENS egenskaper:

  • Real-time all-in-focus images are obtained by scanning the focal length range at high speed. A TAGLENS requires absolutely no mechanical power when scanning, and is characterized by its ability to provide images across all focal lengths without stress, and at the desired magnification and resolving power.


  • The TAGLENS does not require mechanical autofocus, reducing the time consumed for auto-focusing, contributing to the improvement of the data processing speed of the inspection device.

TAGLENS-T1

TAGLENS-T1.png
Resonansfrekvens
70 kHz
Effective aperture
ø11 mm
Transmittans
90% or more (λ400 nm to 700 nm)
Refractivity range
+/- 0.7 to 1 D
Mountable posture
All directions
Driftmiljö / Luftfuktighet
10 °C to 40 °C / 40% to 70%
RH or less (non-condensing)

Pulsed Light Source - PLS

pls.PNG
Ljussystem
Pulse lighting
Lysande färg White
Maximal ljuseffekt *1 30 lm
Light guiding system Optical fiber light guide system
Pulse input
TRIGGER IN jack
Frequency
(resonant frequency of the
TAGLENS-T1)
75 kHz or less
Pulse output
Optical pulse width
(full width at half maximum) *
50 ns to 100 ns
Operating temperature range
5 to 40 ºC,80 % RH max.
*1 Pulse frequency: 70 kHz, Input pulse width: 80 ns Light guide: 2 m long, multi-component glass fiber

Microscope Unit VMU-T1

VideoMicroscopeUnitVMU-T1.png Kompatibel TAGLENS TAGLENS-T1
Bild linsförstoring 1X
Avbildningsområde ø11 mm
Applicerbar objektivlins M Plan Apo Series
Tillval Manual turret, Power turret,
Polarizer and Analyzer, Focusing unit,
X-Y stage, Simple stand

Variable focal length range

M Plan Apo Serie
Objektivlins
1X
2X
5X
7.5X
10X
20X
50X
Djupfokus ×2
0.88
0.18
0.028
0.012
0.007
0.003
0.0018
Totalt skanningsdjup (mm)
16
4
0.64
0.28
0.16
0.04
0.007
Real FOV
(mm)
1/2 inch camera
4.8 × 6.4
2.4 × 3.2
0.96 × 1.28
0.64 × 0.85
0.48 × 0.64
0.24 × 0.32
0.096 × 0.128
2/3 inch camera
6.6 × 8.8
3.3 × 4.4
1.32 × 1.76
0.88 × 1.17
0.66 × 0.88
0.33 × 0.44
0.132 × 0.176
Note: M Plan Apo HR Series is not supported.

    Boka en demo!

    Är ni redo att lära er mer om nya TAGLENS? Boka en demo med våra experter idag!


Banner_HP-Block_MiCAT_Planner_Leaflet.jpg

Download details on MiCAT Planner

Part programs – easy, fast and reliable. Regardless of your measuring tasks, MiCAT Planner adds an abundance of benefits to your CAD-based programming.

Download the Leaflet here (717.05 KB)

Banner_HP-Block_MCOSOMOS_Leaflet.jpg

Download details on Mitutoyo MCOSMOS

MCOSMOS - The ultimate package for operating 3D CNC Coordinate Measuring Machines

Download the Leaflet here (1,945.94 KB)

Banner_HP-Block_MeasurLink-FREE-60-Days-Full-Version.jpg

Additional Free Software! 60 DAY Statistical Process Control Software FREE TRIAL!

For more free use of our various software check out our offer of MeasurLink 9 and see if you would like to try either out for yourself! 

Find out more